How to Heat Press a Handle Tumbler with HTVRONT A200

Q: What temperature and time settings should I use for handle tumblers?

For handle tumblers with the A200, use D Mode which automatically sets the temperature to 200°C with a pressing time of 160 seconds and pressure at 110. These settings are optimized for 40oz handle tumblers.

Q: Can I use the same settings for different sizes of handle tumblers?

The D Mode setting is specifically calibrated for 40oz handle tumblers. For different sizes, use Custom Mode and adjust settings based on manufacturer recommendations. Always run a test press first.

Q: Why is my sublimation design coming out faded on the tumbler?

Faded designs are usually caused by insufficient heat or pressure, loose sublimation paper, or a dirty tumbler surface. Check your settings, secure the paper tightly, and clean the tumbler before pressing.

Q: How do I clean the A200 heat press after use?

After the machine has cooled, wipe the heat plates and interior with a soft, dry cloth. Avoid harsh detergents or abrasive cleaners. Regular cleaning helps maintain optimal performance.

Q: Can I press other items besides tumblers with the A200?

Yes! With interchangeable modules, the A200 can press straight mugs, handle tumblers, and glassware. Check the other tutorials for pressing straight tumblers and glassware.

How to Heat Press a Handle Tumbler with HTVRONT A200

← Go back

How to Heat Press a Handle Tumbler with HTVRONT A200

Written by Tia Isom

Published on September 10, 2025

Modified on August 27, 2026

Reading time for 6 min

Table of Contents

Introduction: Meet the A200 Tumbler Heat Press

The HTVRONT A200 Tumbler Heat Press is a versatile and user-friendly machine, perfect for sublimation enthusiasts. Whether you're a beginner or an experienced crafter, this guide will walk you through the process of heat pressing a handle tumbler. With the right tools and preparation, you can create stunning, professional-quality designs with ease.

Custom tumblers are one of the most popular sublimation projects — they make great personalized gifts, promotional items, or products for your small business. The A200 makes the process simple and repeatable, so you can create consistent results every time.

💡 Quick Tip: Before you start, make sure you're working in a well-ventilated area and have all your materials within reach. Preparation is the key to a smooth pressing experience.

What You Need to Prepare

Before starting, gather the following items:

Materials needed for heat pressing a handle tumbler with the A200: heat press mat, A200 machine, sublimation paper, handle tumbler, gloves, scissors, and heat-resistant tape

1. Heat Press Mat

Essential for even heat distribution and protecting your tumbler.

2. HTVRONT A200 Tumbler Heat Press

The star of the show! Your all-in-one tumbler pressing solution.

3. Printed Sublimation Paper

Your custom design printed on sublimation paper.

4. 40oz Handle Tumbler

The tumbler you'll be customizing. Make sure it's sublimation-ready.

5. Heat-resistant Gloves

Protect your hands from high temperatures during the process.

6. Scissors

For cutting your sublimation design to the correct size.

7. Heat-resistant Tape

Keeps your design securely in place during pressing.

8. Screwdriver

For removing the detachable handle on the tumbler.

Step 1: Replace the Heat Plate Module

The A200's default heat plate module is designed for straight ceramic, glass, and stainless steel mugs. To heat press a handle tumbler, you'll need to swap it out for the handle tumbler module.

Step 1

Replace the Heat Plate Module

Grab the orange handle on the current heat plate module and pull it straight out.
Take the handle tumbler module, align its side rails with the machine's tracks, and push it in until you hear a satisfying "click."

Step 1: Replacing the heat plate module on the A200 Tumbler Heat Press — swapping the default module for the handle tumbler module

⚠️ Important: Make sure the module is fully seated and the click is audible before proceeding. A loose module can cause uneven heating and poor transfer results.

Step 2: Power On and Set the Mode

Press the "Power" button to turn on the machine. By default, the settings are 200°C, 110 pressure, and 190 seconds.

Step 2

Power On and Set the Mode

For handle tumblers, switch to "Custom" mode and select D Mode (200°C, 110 pressure, 160 seconds). This setting is optimized for handle tumblers to ensure perfect results.

Step 2: Setting the mode on the A200 Tumbler Heat Press — selecting Custom mode and D Mode for handle tumbler pressing

Step 3: Print & Cut the Sublimation Design

Handle tumblers require heat pressing in three parts: the top, middle, and bottom. Each section needs its own printed design.

Step 3

Print & Cut the Sublimation Design

Open HTVRONT IdeaStudio and click "Library" to choose a design, or upload your own by selecting "File" > "Upload."
On the "My Device" panel, select "A200 Auto Tumbler Heat Press."
For a 40oz handle tumbler, set the Canvas Size to 35.56 x 21.5 cm (8.5 x 14 inches).
Select your desired print mode:
- Upper (Handle Excluded)
- Upper (Full Coverage)
- Middle
- Low
- Middle & Low
Adjust the design size and use the "Clipping Mask" tool to crop it to fit the tumbler. Don't forget to mirror the image before printing.

Step 3: Mirroring the design in HTVRONT IdeaStudio before printing for sublimation transfer

⚠️ Mirror Your Design! For sublimation transfers, the image must be mirrored before printing. If you forget this step, your design will appear reversed on the final product. This is especially important for text and logos.

After printing the designs for the top, middle, and bottom sections, cut them out using scissors. If you have a vinyl cutter, you can use it to cut the designs, but scissors are often quicker and easier for this task.

Step 4: Stick the Designs to the Tumbler

The HTVRONT handle tumbler features a detachable handle, making it easier to work with. Use a screwdriver to remove the handle before proceeding.

Step 4

Stick the Designs to the Tumbler

Ensure the tumbler's surface is clean — rinse and dry it thoroughly before pressing.
Wrap the cut designs around the corresponding sections of the tumbler (top, middle, and bottom).
Secure the designs tightly with heat-resistant tape, ensuring there are no gaps or loose edges.

Step 4: Wrapping and securing sublimation designs onto the handle tumbler with heat-resistant tape

Step 5: Wrap It Up & Place It Inside

Step 5

Wrap It Up & Place It Inside

Wrap the tumbler with the Heat Press Mat to protect it and ensure even heat distribution.
Put on your heat-resistant gloves for safety.
Once the A200's "Start" button turns green, insert the tumbler into the machine.

Step 5: Wrapping the tumbler with the heat press mat and placing it inside the A200 Tumbler Heat Press

Step 6: Press It & Hot Peel It — Done!

Step 6

Press It & Hot Peel It — Done!

Press the "Start" button and let the machine do its magic.
When you hear a long beep, carefully remove the tumbler and heat press mat — don't forget to wear your gloves!
Wait about 30 seconds, then peel off the sublimation paper while it's still warm.

And just like that, your custom handle tumbler is complete!

Step 6: Heat pressing the handle tumbler and hot peeling the sublimation paper after the cycle is complete

🔥 Hot Peel vs. Cold Peel: Handle tumblers require a hot peel — peel the sublimation paper while it's still warm (about 30 seconds after pressing). This ensures clean ink transfer and prevents the design from lifting. For more details, check out our guide on hot peel techniques.

Complete Video Tutorial — Heat Press a Handle Tumbler

Watch the full step-by-step video tutorial below:

Frequently Asked Questions

What temperature and time settings should I use for handle tumblers?

For handle tumblers with the A200, use D Mode which automatically sets the temperature to 200°C with a pressing time of 160 seconds and pressure at 110. These settings are optimized for 40oz handle tumblers and have been tested to deliver consistent, professional results.

Can I use the same settings for different sizes of handle tumblers?

The D Mode setting on the A200 is specifically calibrated for 40oz handle tumblers. For different sizes, we recommend using Custom Mode and adjusting the settings based on the manufacturer's recommendations. As a general guideline, smaller tumblers may require slightly less time, while larger ones may need more. Always run a test press first.

Why is my sublimation design coming out faded on the tumbler?

Faded designs are usually caused by one of three issues: (1) Insufficient heat or pressure — make sure you're using D Mode (200°C, 110 pressure, 160 seconds). (2) The sublimation paper was not taped down securely — loose edges can cause uneven transfer. (3) The tumbler surface wasn't clean before applying the design. Always rinse and dry the tumbler before wrapping it with your design.

How do I clean the A200 heat press after use?

After the machine has cooled down completely, wipe the heat plates and interior with a soft, dry cloth to remove any ink or adhesive residue. Avoid using harsh detergents or abrasive cleaners, as they can damage the heating elements. Regular cleaning helps maintain optimal performance and extends the life of your machine.

Can I press other items besides tumblers with the A200?

Yes! The A200 is a versatile machine with interchangeable modules. With the straight mug module, you can press ceramic, glass, and stainless steel mugs. With the handle tumbler module, you can press handle tumblers as shown in this guide. Check out our other tutorials for pressing straight tumblers and glassware.

📚 Keep Learning: More Guides to Level Up Your Craft

Love sublimation? Explore these related guides:

How to Heat Press a Handle Tumbler with HTVRONT A200

How to Heat Press a Handle Tumbler with HTVRONT A200

Introduction: Meet the A200 Tumbler Heat Press

What You Need to Prepare

Step 1: Replace the Heat Plate Module

Step 2: Power On and Set the Mode

Step 3: Print & Cut the Sublimation Design

Step 4: Stick the Designs to the Tumbler

Step 5: Wrap It Up & Place It Inside

Step 6: Press It & Hot Peel It — Done!

Complete Video Tutorial — Heat Press a Handle Tumbler

Frequently Asked Questions

Other A200 Tumbler Heat Press Tutorial Videos

📚 Keep Learning: More Guides to Level Up Your Craft

Other Guest Post

What is Hat Heat Press

5 Creative Items You Never Thought You Could Make

Back-to-School DIY with the A100 Multi Heat Press: Custom Sashes, Shirts, Hats & More

Parent-Child Heat Press Fun: Creating Pet-Themed T-Shirts Together

How to Wash DTF Shirts and Keep That Soft, Rubbery Feel

When Should You Use a Teflon Sheet? Heat Press Advanced Guide

How to Price HTV, Sublimation, DTF, Embroidery & Laser Crafts in 2026

DIY Apparel Printing in 2026: Which Method Makes the Most Money?

Other Video

Tumbler Heat Press Inspiration - Sublimation × Adhesive Gem Stickers

Sublimating a Colorful Leopard-Print Handled Tumbler with an A200 Auto Tumbler Heat Press Machine

Heat Pressing on Frosted Glass Tumblers - Combining Sublimation Substrates with a Leopard Print Self-Adhesive Vinyl Design

Make a Cute Pink Stainless Steel Tumbler with Handle with A200 Tumbler Heat Press

Best Christmas Napkins Heat Press inspiration!

Heat press everything with H10 T shirt press

How to make a Sublimation Flip Sequin Note with H10 Portable Heat Press

How to use Rainbow Glitter Vinyl? - Video tutorial

Get the latest news from HTVRONT